Products
-
Large hexagon bolt of steel structure
Steel structure bolt is a kind of high-strength bolt and a kind of standard part. Steel structure bolts are mainly used in steel structure engineering to connect connection points of steel structure plates. Large hexagonal high-strength bolts belong to the high-strength grade of common screws. The hexagonal head will be larger. The big six-angle structural bolt consists of a bolt, a nut and two washers. Generally 10.9. -
Stainless steel hex nuts
Stainless steel hex nuts are used in conjunction with bolts and screws to connect and fasten parts. Among them, Type 1 six-purpose nuts are the most widely used. Grade C nuts are used in machines, equipment or structures with rough surfaces and low precision requirements. -
Steel brace
Steel brace is suitable for roof and wall beams of steel structure engineering. Straightening generally refers to round steel that ties steel purlins, i.e. coarse steel bars, to enhance the stability of purlins and make purlins less prone to instability and damage under certain external forces. There are diagonal braces (i.e. 45-degree bending at the screw thread) and straight braces (i.e. the whole is straight). After hot galvanizing treatment, antirust effect is achieved. -
Hot Galvanized External Hexagon Bolt
There are many different names for the outer hexagonal bolt, for example, it can be called the outer hexagonal bolt, for example, it can be called the outer hexagonal bolt. It can also be called an outer hexagonal bolt. This all means the same thing. It's just that personal habits are different. -
Drill tail wire
The tail of the drill tail nail is mostly in the shape of a drill tail or a sharp tail, which quickly occupies the market due to its simple use and easy operation. The drill tail nail can be used for drilling holes on various basic materials to realize quick splicing and assembly, has strong adhesive force, is not easy to loosen and fall off, is very simple and convenient to use, and has high safety factor. -
The hot-dip galvanized nut
The hot-dip galvanized nut is matched with the hot-dip galvanized bolt, that is, the reaming nut is subjected to hot-dip galvanized surface treatment. Because hot galvanizing is coated with zinc, reaming is necessary. Hot galvanizing is characterized by unsmooth surface but strong corrosion resistance. It is generally used outdoors and has 4.8, 8.8, 10.9 and 12.9 high strength grades. -
Torsional shear bolt for steel structure
Steel structure bolt is a kind of high-strength bolt and a kind of standard part. Steel structure bolts are mainly used in steel structure engineering to connect connection points of steel structure plates. Steel structure bolts are divided into torsional shear type high-strength bolts and large hexagonal high-strength bolts. -
U-shaped hoop
U-shaped hoop. A bolt commonly used in pipe installation to fix pipes. This bolt is shaped like a U-shape. Used to link two firmware. There are 4.8 and 6.8 grades, which have been treated by hot galvanizing to achieve anti-corrosion effect.